How do I enable voice commands on the M100?

Forums Cyber Eyez Support How do I enable voice commands on the M100?

This topic contains 1 reply, has 2 voices, and was last updated by  webstore 5 months, 4 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #610

    Sean Tibbetts
    Keymaster

    Turn Voice Recognition On For the M100
    The Easy Way

    1. Long press button number 2 to get back to the Vuzix Home Screen “master escape hatch”
    2. Long press button number 1 to bring up the Home Screen Menu
    3. Short press button number 1 to highlight Enable Voice Control
    4. Short press button number 3 to select Enable Voice Control

    The Hard Way

    1. Long press button number 2 to get back to the Vuzix Home Screen “master escape hatch”
    2. Short press button number 1 or number 2 repeatedly until you get to Settings
    3. Short press button number 3 to open Settings
    4. Short press button number 1 repeatedly until you get to Vuzix Voice Recognition
    5. Short press button number 3 to select Vuzix Voice Recognition
    6. Short press button number 3 to toggle the switch from Off to On
    7. Long press button number 2 (“master escape hatch”) to go back to the Vuzix Home Screen

    Direct from the Vuzix M100 Product Guide:

    If voice control is turned on the Mic icon is present on the status bar of the M100, and the M100 is always listening for the ‘Voice On’ command. If you say ‘Voice On’, the Mic will go from grey to green showing the M100 is now listening for a voice command. By default, after 15 seconds of not hearing any voice commands, the Mic icon will return to grey, and the M100 will stop listening for any command other than ‘Voice On’ and wait to be re-enabled. The 15 second default timeout can be adjusted through the Settings application under Voice. The range is in seconds with zero (0) being always listening. The list of recognized voice commands is growing constantly and may vary from one program to another.

    #1217

    webstore
    Keymaster

    Turn Voice Recognition On For the M300

    1. Go to the Vuzix Home screen by long pressing button #2
    2. Navigate to Settings by short pressing button #1 or button #2 and launch it by short pressing button #3
    3. Short press button #1 many times until you get to Speech Recognition and launch it by short pressing button #3
    4. Short press button #1 to highlight Vuzix Speech Recognition
    5. Short press button #3 to toggle Speech Recognition on
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.